Product Overview
September 2007 © 2007 Foundry Networks, Inc. 2 - 11
Lnk/Act Bottom left On The link is up.
Off The link is down.
Blinking The port is transmitting and/or receiving
traffic.
10 Gbps Port LEDs
Lnk Located beside
the 10-GbE
port.
This is the top-
most LED.
On The port is connected.
Off No fiber port connection exists or the link
is down.
Act Located beside
the 10-GbE
port.
This is the
bottom-most
LED.
On or Blinking Traffic is being transmitted and/or received
on the fiber port.
Off No traffic is being transmitted or received
on the fiber port.
POE Port LEDs
POE Locate d along
the bottom of
the copper ports
Left for upper
port
Right for lower
port
On (Green) The port is enabled, a power-consuming
device has been detected, and the
module is supplying power to the device.
Off The port is not providing in-line power.
Power Supply LEDs
Power Right-most LED
beneath the
console port
On The device is powered on and has enough
power to operate.
Off The device is not powered on, or has
been powered on but does not have
sufficient power to operate.
PS1 Left-most LED
beneath the
console port
On Power supply 1 is installed and is
functioning normally. Power supply 1 is
located in the right-hand bay (when you
are facing the rear of the device).
Off Power supply 1 is not installed or is not
providing power.
PS2 Middle LED
beneath the
console port
On Power supply 2 is installed and is
functioning normally. Power supply 2 is
located in the left-hand bay (when you are
facing the rear of the device).
Off Power supply 2 is not installed or is not
providing power.
Table 2.2: LEDs (Continued)
LED Position State Meaning