FastIron GS Compact Layer 2 Switch Hardware Installation Guide
NOTE: A note emphasizes an important fact or calls your attention to a dependency.
CAUTION: A caution calls your attention to a possible hazard that can damage equipment.
WARNING: A warning calls your attention to a possible hazard that can cause injury or death.
Related Publications
The following Foundry Networks documents supplement the information in this guide.
•Foundry FastIron Configuration Guide – for FastIron Edge Switch X Series (FESX), FastIron SuperX Switch (FSX), FastIron SX 800, FastIron SX 1600, FastIron Workgroup Switch X Series (FWSX), and FastIron GS (FGS), provides configuration procedures for
•Foundry Management Information Base Reference – contains the Simple Network Management Protocol (SNMP) Management Information Base (MIB) objects supported on Foundry devices.
•Release Notes for the FastIron GS Switch (FGS) – describes features introduced in each software release, lists features that are supported on the FGS, and describes how configuration procedures or defaults differ from those on other Foundry devices, due to the FGS’s hardware architecture.
To order additional copies of these manuals, do one of the following:
•Call 1.877.TURBOCALL (887.2622) in the United States or 1.408.207.1600 outside the United States.
•Send email to info@foundrynet.com.
NOTE: For the latest edition of this document, which contains the most
How to Get Help
Foundry Networks technical support will ensure that the fast and easy access that you have come to expect from your Foundry Networks products will be maintained.
Web Access
•kp.foundrynet.com
Email Access
Technical requests can also be sent to the following email address:
•support@foundrynet.com
Telephone Access
•1.877.TURBOCALL (887.2622) United States
•
Warranty Coverage
Contact Foundry Networks using any of the methods listed above for information about the standard and extended warranties.
1 - 2 | © 2007 Foundry Networks, Inc. | September 2007 |
