FARGO electronic 970627-510489-(04) manual Inserting Photo PAPER, POSTCARDS, or Label Paper

C.INSERTING PHOTO PAPER, POSTCARDS, OR LABEL PAPER

FotoFUN! paper is inserted one sheet at a time and only when the printer prompts you to do so.

1.With ribbon installed and the printer cover closed, send a print job to FotoFUN!

2.When you hear the printerÕs feed rollers begin to turn, insert the paper into the printer with the glossy print side facing down. Note that once the rollers begin to turn, you have about 20 seconds to insert the paper. If you wait longer than 20 seconds before inserting the paper into the printer, the feed rollers will stop turning and the clear light will begin flashing quickly. To resume printing, simply press the clear button to restart the feed rollers, and insert the paper.

IMPORTANT! Do not touch the printable side of the paper. Oil or dirt from your hands can impair print quality. Handle blank photo paper by grasping only the very top or bottom of the sheet. Also, do not attempt to insert FotoFUN! paper, postcards, or label paper into a laser printer. This media is sensitive to extreme heat and could damage a laser printer!

3.Insert paper into the printer until it pauses. Once inserted, paper will automatically feed and print.

NOTE: As an added feature, it is also possible to pre-load a sheet of paper before you begin your print job. To do this, simply press the clear button to start the feed rollers turning. Then, insert a sheet of paper according to the above instructions. You can now start your print job and walk away. FotoFUN! will automatically begin printing once it receives your print job.

5 Photo Ribbon and Paper