Appendix C.2. Hardware connections | FieldServer FS-8700-19 manual

FS-8700-19_Metasys_N2 Driver Manual

Page 25 of 51

Appendix C.2. Hardware connections

The FS-8917-16 pigtail cable is typically used for this port arrangement. Connection is depicted in the following diagram.

											SERIAL
														FS-X20
													RJ45 Male Modular
														Jack
						ORANGE/WHITE
							(RJ45-08)
							BROWN
							(RJ45-01)
			+				FS-8917-16
			+
			-
			G
							BLUE/WHITE
							(RJ45-04)
							8	7	6	5	4	3	2	1
8	7	6	5	4	3	2	1

RJ45 Male Modular Jack

RJ45 Female Modular Jack

Appendix C.3. Configuration Settings

•The Port address in the Configuration needs to be set to R1 instead of P1.

•Line_Drive_On and Line_Drive_Off need to be defined in the connections section of the configuration file. These need to be set to at least 0.001s. Refer to Sections 4.2 and 5.1 for more information.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: support@fieldserver.com

Image 25

FieldServer FS-8700-19 instruction manual Appendix C.2. Hardware connections, Appendix C.3. Configuration Settings

Contents

FS-8700-19 Metasys N2 Table of Contents Metasys N2 Description Provided by the Supplier of 3rd Party Equipment Hardware Required 3rd Party ConfigurationRequired 3rd Party Software Hardware Connection Tips / Hints Hardware Connections Data Arrays/Descriptors Configuring the FieldServer as a Metasys N2 Client Client Side Connection Descriptions Client Side Node Descriptors AI, AO, DI, do Object Configuration VMA Map Descriptor Parameters ADF ADI Timing Parameters 2.3. DX9100 Map Descriptor Parameters Map Descriptor Example 2 VMA Map Descriptor Example 1 N2Open DAAO3 Wrbx Map Descriptor Example 3 DX9100 Server Side Connection Descriptors Configuring the FieldServer as a Metasys N2 Server Server Side Node Descriptors Driver Specific Map Descriptor Parameters Map Descriptor Example FS-8700-19MetasysN2 Driver Manual Appendix A.2. Managing Analog Inputs and Outputs for DX9100 Appendix B.3. Tip on Overrides Appendix B.2. Offline Behavior FS-8700-19MetasysN2 Driver Manual FS-8700-19MetasysN2 Driver Manual Appendix C.2. Hardware connections Appendix C.3. Configuration Settings FS-8700-19MetasysN2 Driver ManualPage 26 SUP UnitMNT Diag Pmopt PmtypPMF1 PMF2 PMK33 PMK32PMK34 PMOU1 DO@ DOTFB@ DOF@ XTLOA6 XTHIA6XTHIA7 XTLOA7 FS-8700-19MetasysN2 Driver Manual DEC HEX Appendix D.2. Metasys DC9100 Memory Map TYPE1 TYPE3 TYPE6 TYPE8 LR1 HR1HR2 LR2 OSZT@ OsoptOSOT@ OSSP@ Appendix D.3. Metasys TC9100 Memory Map ROS DO6 Triac DO7 DO1 DO2Mods Modt RAS LSCIAS AFM PM5K2 PM5TYPPM5K3 PM5K4 OCN4 OCO3OCO4 OCN5 TCS3 TCS2TCS1 HDW1 FTC1 LRI1OFS1 IOP1 FSP FT@Fdif LOO DST2 DST1DST3 DST4 DST6 DST5DST7 Error Message Description and Action Appendix E. Error Messages This page Intentionally Left Blank