Technical Manuals Online | First Alert FA1220CV instruction

Technical Manuals Online!

14.POWER/READY INDICATOR: (GREEN) On some keypads, this lights when primary power is on. If off, system is operating on its backup battery power. CALL YOUR INSTALLER IMMEDIATELY. On other types of keypads, lit indicates system is ready to be armed, while unlit indicates system not ready.

15.ARMED INDICATOR: (RED) Lit when the system has been armed (STAY, AWAY, INSTANT or MAXIMUM).

16.INTERNAL SOUNDER: Source of audible internal warning and confirmation sounds, as well as alarms (see "Summary of Audible Notifications").

17.A-B-C PANIC KEYS: Refer to the PANIC KEYS section for descriptions of these keys.

18.SPEED KEY [D]: The "D" key can be used to activate a pre-programmed string of up 16 keystrokes, known as a macro. Refer to the SPEED KEY section for procedures on using this key.

- http://www.tech-man.com

NOTE:

Unless stated otherwise, most procedures in this manual apply to all keypad types and styles.

IMPORTANT!:

When using the keypad to enter codes and commands, sequential key depressions must be made within 3 seconds of one another. If 3 seconds elapses without a key depression, the entry is aborted and must be repeated from its beginning.

1

15

14

2

13

16

SHOWN WITH FLIP-DOWN KEY COVER

ARMED

READY

First Alert

AB

CD

OFF AWAY STAY

1 2 3

MAXIMUM TEST BYPASS

4 5 6

INSTANT CODE CHIME

7 8 9

READY

* 0 #

Professional

19

17

18

4

5

6

7

10

REMOVED

12 11 9 8

– 11 –

Image 11

First Alert FA1220CV technical manual Technical Manuals Online

Contents

Users Guide Table of Contents General Partitioned System Zones System Overview Arming Features For Each Arming Mode System Overview System Overview Alpha Keypad Fixed-Word Keypad About the KeypadsGeneral 0000 Online OFF Functions of the Keypad Technical Manuals Online Partition ENTRY/EXIT DelaysGeneral Information Checking for Open Zones Using Ready KeyTo show faulted zones Displaying ALL Zone Descriptors Enter your security code and press Using Bypass KeyBypassing Protection Zones To bypass zones, the system must be disarmed first Displaying Bypassed Zones To use the Quick Bypass featureQuick Bypass Arming Perimeter only Using Stay key Using Instant Key With Entry Delay OFF Arming ALL Protection Using Away Key Using Maximum Key To disarm the system and silence burglary or fire alarms Disarming and Silencing AlarmsUsing the 1 OFF Key Memory of Alarm General Using the Keyswitch Using Key Chime Mode MESSAGE. Press For 5 Secs Viewing Central Station Messages Keys Zone Function Panic KeysActive Panic Functions Quick Arming Security Codes & Authority LevelsInformation Duress Code Security Codes & Authority Levels To Exit User Edit General Rules onAuthority Levels Changes Enter Master or Manager code and press To Add a User To Add a User Limited Use User #84 Command To Delete a User To Change a Users Code To Goto another partition using an alpha keypad Accessing Other Partitions General Information Defining Executing Speed Key Macros Using #70 Relay Menu Mode Select the partition FA1220CV Event Logging Procedures To Exit the Event Log Press at any time FA1220CV Event Logging Procedures Using Test Key Testing the System System Testing Your Typical Check Displays Trouble Conditions Servicing Information Silencing a Fire Alarm Smoke Detectors for Minimum Protection Emergency Evacuation Steps to Safety Maintaining Your System Maintaining Your System Quick Guide to FA1220CV System Functions Quick Guide to FA1220CV System Functions Summary of Audible Notification Glossary UL Notice This is a Grade a system Federal Communications Commission FCC Part 15 Statement Federal Communications Commission FCC Part 68 Notice Canadian Department of Communications DOC Statement Limitations of this Alarm System Limitations of this Alarm System Owners Insurance Premium Credit Request Owners Insurance Premium Credit Request ONE Year Limited Warranty Page Page ÀN7003-1V2ä