Using the Keyswitch, General | First Alert FA1220CV specification

Technical Manuals Online!

USING THE KEYSWITCH

General

Your system may be equipped with a keyswitch for use when arming and disarming. A red and green light on the keyswitch plate indicate the status of your system as follows:

Green Light: Lights when the system is disarmed and ready to be armed (no open zones). If the system is disarmed and the green light is off, it indicates the system is not ready (one or more zones are open).

- http://www.tech-man.com

GREEN	RED
	RED
	Disarming

Red Light: Lights when system is armed or memory of alarm exists.

Lit Steady: System is armed in AWAY mode.

Slow Flashing: System is armed in STAY mode.

Rapid Flashing: Memory of alarm, indicating an alarm has occurred .

Arming

To arm in the AWAY mode, turn the key to the right for 1 second and release. Keypads will beep twice and the red light will stay on steady.

To arm in the STAY mode, turn the key to the right and hold for longer than 5 seconds, then release. Keypads will beep three times and the red light will flash slowly.

To disarm the system, turn the key to the right and release. If an alarm has occurred, the red light will be flashing rapidly (memory of alarm).

– 22 –

Image 22

First Alert FA1220CV technical manual Using the Keyswitch, General

Contents

Users Guide Table of Contents System Overview General Partitioned System Zones Arming Features For Each Arming Mode System Overview System Overview General About the KeypadsAlpha Keypad Fixed-Word Keypad 0000 Online Functions of the Keypad OFF Technical Manuals Online General Information ENTRY/EXIT DelaysPartition To show faulted zones Using Ready KeyChecking for Open Zones Displaying ALL Zone Descriptors To bypass zones, the system must be disarmed first Using Bypass KeyBypassing Protection Zones Enter your security code and press Quick Bypass To use the Quick Bypass featureDisplaying Bypassed Zones Using Stay key Arming Perimeter only With Entry Delay OFF Using Instant Key Using Away Key Arming ALL Protection Using Maximum Key Using the 1 OFF Key Memory of Alarm Disarming and Silencing AlarmsTo disarm the system and silence burglary or fire alarms Using the Keyswitch General Chime Mode Using Key Viewing Central Station Messages MESSAGE. Press For 5 Secs Active Panic Functions Panic KeysKeys Zone Function Duress Code Security Codes & Authority LevelsInformation Quick Arming Security Codes & Authority Levels Changes General Rules onAuthority Levels To Exit User Edit To Add a User Enter Master or Manager code and press Limited Use User #84 Command To Add a User To Change a Users Code To Delete a User Accessing Other Partitions To Goto another partition using an alpha keypad Speed Key Macros General Information Defining Executing Using #70 Relay Menu Mode FA1220CV Event Logging Procedures Select the partition FA1220CV Event Logging Procedures To Exit the Event Log Press at any time Testing the System Using Test Key Testing Your System Trouble Conditions Typical Check Displays Servicing Information Alarm Silencing a Fire Smoke Detectors for Minimum Protection Steps to Safety Emergency Evacuation Maintaining Your System Maintaining Your System Quick Guide to FA1220CV System Functions Quick Guide to FA1220CV System Functions Summary of Audible Notification Glossary Federal Communications Commission FCC Part 15 Statement UL Notice This is a Grade a system Federal Communications Commission FCC Part 68 Notice Canadian Department of Communications DOC Statement Limitations of this Alarm System Limitations of this Alarm System Owners Insurance Premium Credit Request Owners Insurance Premium Credit Request ONE Year Limited Warranty Page Page ÀN7003-1V2ä