Technical

FA1220CV EVENT LOGGING PROCEDURES (continued)

Manuals Online! - http://www.tech-man.com

4.Use the [3] & [1] keys (for next and previous categories respectively) to display the categories of events.

Press [8] to select a category and display the first event. Press [8] again for each subsequent event.

Shows burglary alarm occurred in zone 3 (C03) of partition 1 (P1), at 12:02AM on January 1.

P1 01/01 12:02AM

Typical Event

BURGLARY C03

Log Display

 

 

After the last event has been displayed, the END OF EVENT LOG message appears for a few seconds, then the system automatically displays the RECENT/ COMPLETE mode select screen again (see step 2).

5.To EXIT the Event Log: Press [] at any time.

ALARM EVENT LOG

Typical Category

TYPE

CCC UUU

Select Screen

Any or all of the following categories may be active. Check with your installer.

ALARM EVENT LOG

Displays time and date for zones that have either caused an alarm or have been restored in the selected partition.

CHECK EVENT LOG

Displays time and date for zones that have caused a trouble or supervisory condition in the selected partition.

BYPASS EVENT LOG

Displays time and date for zones that have been bypassed in the partition.

OPEN EVENT LOG

Displays time, date and user number for each arming and disarming of the system for the partition selected.

SYSTEM EVENT LOG

Displays time and date for system problems, such as AC Loss, low battery, etc., regardless of partition.

ALL EVENT LOG

Displays all categories of events in chronological order.

See your Installer for additional information concerning the event log.

– 36 –

Page 36
Image 36
First Alert technical manual FA1220CV Event Logging Procedures, To Exit the Event Log Press at any time