Quick Bypass, Displaying Bypassed Zones | First Alert FA1220CV

Technical

BYPASSING PROTECTION ZONES

Manuals Online!

Quick Bypass

Your system may allow you to easily bypass all open (faulted) zones without having to enter zone numbers individually. Ask your installer if this feature is active for your system.

Note: All bypasses are removed when an OFF sequence (security code plus OFF) is performed.

To use the Quick Bypass feature:

	BYPASS
1. Enter your security code and press	6	then press	#	.

- http://www.tech-

2.BYPASS 07 FRONT UPSTAIRSBEDROOM

Typical bypass message

3.DISARMEDBYPASS READY TOARM

In a few moments, all open zones will be displayed along with the word BYPASS. Wait for these zones to be displayed before arming. Arming the system before bypassed zones are displayed eliminates all bypasses.

Arm the system as usual when the keypad displays the "ready" to arm message. Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed.

man.com

Displaying Bypassed Zones

For determining what zones have been previously bypassed.

	BYPASS
1. Enter your security code and press	6	.

2.Wait for all bypassed zones to be sequentially displayed.

– 16 –

Image 16

First Alert FA1220CV technical manual To use the Quick Bypass feature, Displaying Bypassed Zones

Contents

Users Guide Table of Contents System Overview General Partitioned System Zones Arming Features For Each Arming Mode System Overview System Overview General About the KeypadsAlpha Keypad Fixed-Word Keypad 0000 Online Functions of the Keypad OFF Technical Manuals Online General Information ENTRY/EXIT DelaysPartition To show faulted zones Using Ready KeyChecking for Open Zones Displaying ALL Zone Descriptors Using Bypass Key Bypassing Protection ZonesTo bypass zones, the system must be disarmed first Enter your security code and press Quick Bypass To use the Quick Bypass featureDisplaying Bypassed Zones Using Stay key Arming Perimeter only With Entry Delay OFF Using Instant Key Using Away Key Arming ALL Protection Using Maximum Key Using the 1 OFF Key Memory of Alarm Disarming and Silencing AlarmsTo disarm the system and silence burglary or fire alarms Using the Keyswitch General Chime Mode Using Key Viewing Central Station Messages MESSAGE. Press For 5 Secs Active Panic Functions Panic KeysKeys Zone Function Security Codes & Authority Levels InformationDuress Code Quick Arming Security Codes & Authority Levels General Rules on Authority LevelsChanges To Exit User Edit To Add a User Enter Master or Manager code and press Limited Use User #84 Command To Add a User To Change a Users Code To Delete a User Accessing Other Partitions To Goto another partition using an alpha keypad Speed Key Macros General Information Defining Executing Using #70 Relay Menu Mode FA1220CV Event Logging Procedures Select the partition FA1220CV Event Logging Procedures To Exit the Event Log Press at any time Testing the System Using Test Key Testing Your System Trouble Conditions Typical Check Displays Servicing Information Alarm Silencing a Fire Smoke Detectors for Minimum Protection Steps to Safety Emergency Evacuation Maintaining Your System Maintaining Your System Quick Guide to FA1220CV System Functions Quick Guide to FA1220CV System Functions Summary of Audible Notification Glossary Federal Communications Commission FCC Part 15 Statement UL Notice This is a Grade a system Federal Communications Commission FCC Part 68 Notice Canadian Department of Communications DOC Statement Limitations of this Alarm System Limitations of this Alarm System Owners Insurance Premium Credit Request Owners Insurance Premium Credit Request ONE Year Limited Warranty Page Page ÀN7003-1V2ä