Checking for Open Zones, Using Ready Key | First Alert FA1220CV

Technical Manuals

Using the ✱

READY Key

CHECKING FOR OPEN ZONES

Before arming your system, all protected doors, windows and other protection zones must be closed or bypassed (see BYPASSING section). Otherwise the keypad will display a "Not Ready" message. Pressing the READY key will display all zones that are faulted, making it easier for you to secure any open zones.

Online! -

To show faulted zones:

DISARMED - PRESS

✴TOSHOWFAULTS

Note: Some keypads light a green LED when the system is ready. If not lit, the system is not ready to be armed.

READY

http://www.

1. Do not enter security code, but simply press	✱	.

	FAULT 05 FRONT	Typical fault display
	UPSTAIRS BEDROOM	Typical fault display
	UPSTAIRS BEDROOM

tech-man.com

2.

DISARMED

READY TOARM

Secure or bypass the zones displayed before arming the system. The "Ready" message will be displayed † when all protection zones have been either closed or bypassed.

†NOTE: All or part of this message may be replaced by a customized message programmed by the installer. Bear this in mind whenever the instructions indicate that the "DISARMED" or "READY" message will be displayed.

– 13 –

Image 13

First Alert FA1220CV technical manual Checking for Open Zones, Using Ready Key, To show faulted zones

Contents

Users Guide Table of Contents General Partitioned System Zones System Overview Arming Features For Each Arming Mode System Overview System Overview General About the KeypadsAlpha Keypad Fixed-Word Keypad 0000 Online OFF Functions of the Keypad Technical Manuals Online General Information ENTRY/EXIT DelaysPartition To show faulted zones Using Ready KeyChecking for Open Zones Displaying ALL Zone Descriptors Bypassing Protection Zones Using Bypass KeyTo bypass zones, the system must be disarmed first Enter your security code and press Quick Bypass To use the Quick Bypass featureDisplaying Bypassed Zones Arming Perimeter only Using Stay key Using Instant Key With Entry Delay OFF Arming ALL Protection Using Away Key Using Maximum Key Using the 1 OFF Key Memory of Alarm Disarming and Silencing AlarmsTo disarm the system and silence burglary or fire alarms General Using the Keyswitch Using Key Chime Mode MESSAGE. Press For 5 Secs Viewing Central Station Messages Active Panic Functions Panic KeysKeys Zone Function Information Security Codes & Authority LevelsDuress Code Quick Arming Security Codes & Authority Levels Authority Levels General Rules onChanges To Exit User Edit Enter Master or Manager code and press To Add a User To Add a User Limited Use User #84 Command To Delete a User To Change a Users Code To Goto another partition using an alpha keypad Accessing Other Partitions General Information Defining Executing Speed Key Macros Using #70 Relay Menu Mode Select the partition FA1220CV Event Logging Procedures To Exit the Event Log Press at any time FA1220CV Event Logging Procedures Using Test Key Testing the System System Testing Your Typical Check Displays Trouble Conditions Servicing Information Silencing a Fire Alarm Smoke Detectors for Minimum Protection Emergency Evacuation Steps to Safety Maintaining Your System Maintaining Your System Quick Guide to FA1220CV System Functions Quick Guide to FA1220CV System Functions Summary of Audible Notification Glossary UL Notice This is a Grade a system Federal Communications Commission FCC Part 15 Statement Federal Communications Commission FCC Part 68 Notice Canadian Department of Communications DOC Statement Limitations of this Alarm System Limitations of this Alarm System Owners Insurance Premium Credit Request Owners Insurance Premium Credit Request ONE Year Limited Warranty Page Page ÀN7003-1V2ä