Technical
SECURITY CODES & AUTHORITY LEVELS
Manuals
To Change a User's Code
1.Enter Master/Manager code and press the
2.Enter the new code for that user.
CODE
8
key + user number to be changed.
Online! - http://www
ADDNEWUSER? 0 = NO,1 = YES
USER 02 CHANGED SUCCESSFULLY
The system will recognize that the user number is already in use and will prompt whether or not this is a new user. Enter 0 to change the user's code to the code entered in step 2.
The system confirms that the change is allowed based on authorization level, and if so, puts the new code into effect.
Note that if changing one’s own code, the system will prompt for the new code to be reentered. This prevents accidentally changing a high level code.
CODE
.tech
To Delete a User
1. | Enter the Master or Manager code and press the | 8 key + User Number to be | |
| deleted. |
|
|
2. | Enter the same Master or Manager code again. |
|
|
-man.com
OK TO DELETE
0 = NO,1 =YES
USER CODE
DELETED
The system will recognize that the user number is already in use and will prompt to confirm that it should be deleted. Press 0 (NO) or 1 (YES).
If yes, that user's code is removed from all partitions to which it was assigned, and all authority levels and other information about that user is deleted. Note that a user can only be deleted from the partition in which it was first assigned, and can only be deleted by a user with a higher authority level. A User's security code cannot be deleted by oneself.
– 31 –
