First Alert FA1220CV General Rules on, Authority Levels, Changes, To Exit User Edit, Mode

Technical Manuals Online! - http://www.tech-man.com

SECURITY CODES & AUTHORITY LEVELS

General Rules on	• A user may not delete or change the user code of the SAME or HIGHER authority than which
Authority Levels		he is assigned.
and Changes	• A master/manager may only ADD users to a LOWER authority level.
	•	A master/manager may assign access codes only to those partitions to which the user adding
		the code has access. (ex. a user with access to only partition 1 cannot assign codes in
		partition 2.)
	•	The only way to assign a user's authority level is by using the "Add A User" procedure. To
		change a user's authority level, that user must first be deleted, then added again.
	• A user can only be DELETED or CHANGED from within the partition he is assigned.
	• User numbers must be entered as 2-digit entries. Single digit user numbers must be
		preceded by a "0" (example, 03, 04, etc.). Security codes are entered as 4-digit numbers.
	•	Before assigning a security code, be sure it does not conflict with any DURESS code or other
		user code.
	Note: When adding, changing or deleting users, all other alpha keypads in that partition will
	display "User Edit Mode – Please Stand By", and key depressions (except Panic) at those
	keypads will be ignored. Panic key depressions will cause an alarm and terminate user entry.
To Exit User Edit	You can exit any of the user edit modes described on the following pages at any time by doing
Mode	the following:
	1.	Press either	✱	or	#	, or don't press any key for 10 seconds.

– 28 –