![Output Action](/images/new-backgrounds/50916/5091653x1.webp)
“C”
01 Enter Zn No.
12
Zone Number
Press [✱] to continue.
(prompt appears if zone number was selected)
Enter the desired zone number associated with this output number. At the ENTER EVENT prompt, enter the zone event that will activate this output.
|
|
|
|
| 01 Enter Event | 0 = restore; 1 = alarm/fault/trouble | |
|
|
|
|
| Restore | 0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Press [✱] to continue to the “Output Action” prompt | ||
|
|
| Output Action | Enter the desired device action. | |||
| 01 Output Action |
| |||||
|
| 0 | = off |
|
|
| |
| Close for 2 sec | 1 |
|
|
| ||
| 1 | = Close for 2 seconds |
|
|
| ||
|
|
| 2 | = Stay Closed |
|
|
|
|
|
|
|
|
| ||
|
|
| 3 | = Pulse on & off (1 sec |
|
|
|
|
|
|
| ON, 1 sec OFF) |
|
|
|
|
|
| 4 | = Change Device State |
|
|
|
|
|
| 5 | = Duration 1 (see data |
|
|
|
|
|
|
| field *177) |
|
|
|
|
|
| 6 | = Duration 2 (see data |
|
|
|
|
|
|
| field *177) |
|
|
|
Press [✱] to continue.
Enter Output No.
R0202
Output Number
Enter the device output number (programmed in *79 Menu Mode) you want associated with this output.
02A E P TRIG
R02 1 1 3 ZL=00
Summary Screen | A summary screen appears showing the programmed settings. |
Press [✱] to continue. | Press [∗] to return to OUTPUT FUNCTION NUMBER prompt |
∗81 ZONE LIST MENU MODE
(press *81 while in Programming mode) The Zone List Worksheet is on page Error! Bookmark not defined..
Zone lists let you group individual zones for use with certain system actions. Using this mode, simply select an appropriate zone list number, then add the desired zone numbers to be included in that list.
The following table shows the available zone lists and their purposes:
List No. |
| Used for… | Notes | ||||
1, 2 | general purpose (GP) | • Any list may include any or all of the system's zone numbers. | |||||
3 |
| • A zone list can be assigned to more than one output relay. | |||||
4 |
| cross zones (see note at right) | • Zone List 4: When creating zone list 4 for cross zoning, | ||||
5 |
| night stay zones | include only zones assigned to zone types 3, 4, or 5. Do not | ||||
6 |
| general purpose | include zones that have delays (entry/exit zones, interior | ||||
|
| : dial delay disable | w/delay) or | ||||
7 |
| general purpose | unpredictable operation and may not function as intended. | ||||
|
| : unlimited reports | See field *85 for Cross Zone Timer option. | ||||
8 |
| general purpose | • Zone List 6: |
| : See field *50 for Dial Delay Disable | ||
| |||||||
9 | zones that activate Pager 1 | ||||||
option. | |||||||
10 | zones that activate Pager 2 | ||||||
• Zone List 7: | : See field *93 for Unlimited Reports | ||||||
11 | zones that activate Pager 3 (FA168CPS) | ||||||
option. | |||||||
12 | zones that activate Pager 4 (FA168CPS) | ||||||
|
|
|
*81 Menu Mode
|
|
| Zone List Number | Enter the Zone List Number to program (or 00 to quit). Press [✱] |
| Zone List No. |
| ||
|
| to advance. | ||
| (00 = Quit) | 01 | ||
| [∗] to continue | In the following displays, zone list 01 has been selected. | ||
|
|
| ||
|
|
|
|
|
|
|
| Zone Number | Enter each zone number to add to the zone list, followed by |
| 01 Enter Zn Num. | |||
| pressing [✱] (example, 01✱, 02✱, 03✱). After all zones are | |||
| (00 = Quit) | 00 | ||
| followed by [∗] to | entered, press 00 to continue. | ||
|
|
| IMPORTANT: Do not include fire zones in zone lists that are | |
|
|
| accept each zone | |
|
|
| used to STOP device actions. | |
|
|
| 00 to continue | |
|
|
| † FA168CPS = | |
|
|
|
|
01 Del Zn List?
0 = No 1 = Yes 0
Deleting Zone Lists
0 = don’t delete list
1 = delete this zone list [∗] to continue
To delete the zone list, enter 1. All zones in the zone list will be deleted automatically and the system returns to the Zone List No. prompt.
To save the zone list, enter 0.