Unpacking the Switch
Package Contents
When unpacking each switch, make sure that the following items are included:
•One Dell Force10 MXL 10/40GbE Switch IO Module
•One USB type
•Getting Started Guide
•Safety and Regulatory Information
•Warranty and Support Information
•Software License Agreement
Unpacking Steps
NOTE: Before unpacking the switch, inspect the container and immediately report any evidence of damage.
1Place the container on a clean, flat surface and cut all straps securing the container.
2Open the container or remove the container top.
3Carefully remove the switch from the container and place it on a secure and clean surface.
4Remove all packing material.
5Inspect the product and accessories for damage.
Installing and Configuring the Switch
After you unpack the MXL 10/40GbE Switch, refer to the flow chart in Figure
You can check to see that a switch is running the latest FTOS version by entering the show version command. To download an FTOS version, go to http://support.dell.com.
14
Installing and Configuring the Switch
