Frymaster SM35 operation manual Gas Conversion Procedures cont, Gas Conversion Components

DEAN MILLIVOLT GAS FRYERS (NON-CE)

CHAPTER 3: INSTALLATION INSTRUCTIONS

3.7 Gas Conversion: Procedures (cont.)

Vessel Assembly

Manifold Support Bracket

Gas Burner

See Detail A

Orifice

Pressure

1/2—3/4 Reducer

Bushing

Gas Valve

Burner

1.63-inch [41-mm]

1.30-inch [33-mm]

Test

Spigot

Gas

Gas Manifold

Orifice

Manifold

Assembly

Temperature

Control

Detail A

Burner/Orifice Location

Typical gas valve, burner and orifice locations (SM50 shown above).

3.8 Gas Conversion Components

Use the following components to convert from natural gas to propane and vice-versa. See Section 3.6 for orifice quantities required for conversion.

Natural Gas to Propane Kit, 826-1817	Propane To Natural Gas Kit, 826-2017
Bushing, NPT Flush, SR 42 Series only	Bushing, NPT Flush, SR 42 Series only
Pilot orifice (16LP)	Pilot orifice (26N)
Burner orifice*	Burner orifice*
(See Table on Page 3-9)	(See Table on Page 3-9)
Rating label, contact factory at time of	Rating label, contact factory at time of
conversion.	conversion.

*Burner orifices listed on page 3-9 are for fryers operating at altitudes of 2000 feet or less. For altitudes greater than 2000 feet, contact the factory for the correct orifice size.

3-11