Fujitsu A3210 manual Replacing the Battery, Cold-swapping Batteries, Hot-swapping Batteries

Replacing the Battery

With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged. There are two ways to swap batteries, cold-swapping and hot-swapping:

Cold-swapping Batteries

To cold-swap batteries in your battery bay follow these easy steps:

1Have a charged battery ready to install.

2Shut down your notebook and disconnect the AC adapter.

3While pushing the battery bay release latches towards the battery pack, lift the battery out of the bay using the latches to lift it.

4Insert a new battery into the bay, and press it down so that the latches click into place.

5Plug in the AC adapter and turn the power on.

Hot-swapping Batteries

To hot-swap batteries in your battery bay follow these easy steps:

BE SURE TO PLUG IN AN AC ADAPTER PRIOR TO REMOVING THE BATTERY. THERE IS NO BRIDGE

BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE THE BATTERY IS BEING REPLACED. IF YOU DO NOT USE AN AC ADAPTER YOU WILL LOSE ANY UNSAVED FILES.

1Plug an AC Adapter into the system and connect it to a power outlet.

2Follow steps 3 through 6 in “Cold Swapping Batteries”.

53 - Lithium ion Battery