6.Attach the Lamp socket cover in the reverse order of its removal. Make sure that the metal part is fixed firmly.

Lamp socket cover

7.Close the glass sheet guide. Make sure that the guide is fixed firmly.

8.Lift the Upper transport unit a little to release the safety lock and then lower the unit slowly, then push the unit to close it completely.

9.Clear the Front-side lamp counter.

Please refer to the section “7.3 Setup Mode Details”, “ 9. Abrasion counter (Abrasion CNT) reset ” on page 7-34.

 

You can check the cumulative lamp-on time from the Operator

HINT

panel Test mode.

 

For the details, refer to the section "7.5 Test Mode Details " " 3. Display the cumulative lamp-on time " on page 7-79.

4

CONSUMABLES OF REPLACEMENT

4.6 Replacing the Front-side Lamp 4-19