(M3097G+)
Connect the interface cables to the interface connectors and fasten the cables with the catches. Connect the other ends of the cables to the host system. If the image scanner is at the terminal side, connect the terminator.
Back of the image scanner
Catches
Catches
Interface cables To the host
system
Terminator
⎧If the image scanner is at ⎪ the terminal side, connect ⎪⎨ the terminator to the
⎪ connector to which an ⎪ interface cable is not ⎩ connected.
⎫
⎪
⎪
⎬
⎪
⎪
⎭
NOTICE
Use shielded interface cables to prevent harmful interferance or avoid receiving interferance that may cause undesired operation.
3 – 4
