5.5SCSI Address Setting (M3097G+)
Press the power switch while pressing the mode 1 button. The liquid crystal display unit displays the following screen.
S C S I I D | L a m p E x c h a n g e |
Blinking
Press the mode 2 button to shift the blinking position. To set a device address, press the mode 1 button while “SCSI ID” is blinking.
S C S I I D | 0 |
The liquid crystal display screen displays this screen. A value from 0 to 7 is displayed in turn each time the mode 1 button is pressed. Press the mode 2 button to store the value when an appropriate value is displayed.
Confirm that the following screen is displayed, and turn off the power.
P o w e r O f f ! !
5 – 9
