Fujitsu M3097G+, M3097E+ manual Notes on Daily Use, Cleaning

5.2Notes on Daily Use

IMPORTANT

Note the following points on daily use:

•The image scanner requires one to three minutes to warm up after the power has been turned on. During this time, the message “Warming-up Now!!” is displayed on the screen.

•Do not look directly at the light source during the read operation. Keep the document cover in place.

•See Section 5.3 “Cleaning”, to clean the document cover, document holding pad, document bed, and the automatic document feeder.

Especially, clean the ADF periodically. For cleaning cycle, see Section 5.3.2 “Cleaning the ADF”.

5.3Cleaning

This section explains how to clean the image scanner.

5.3.1Cleaning the document cover, document holding pad, and document bed

NOTICE

•Use a dry cloth or a cloth with a neutral cleanser or ethyl alcohol to remove dirt from the document cover, document holding pad, and document bed.

Do not use organic solvents such as a thinner.

•Make sure that no liquid enters the scanner from the edges of the document bed glass.

Document cover

Document holding pad

Cloth

Document bed

Neutral cleanser or ethyl alcohol

Thinner

Figure 5.2 Cleaning the document cover, document holding pad, and document bed

5 – 2