4Take documents to be placed in the ADF paper chute. The thickness of the documents to be placed in the ADF paper chute is limited depending on the size of the documents as follows:
A4 or letter size or smaller: 8 mm or less
Size larger than A4: | 4 mm or less |
5Angling the documents
Angle the document edges as follows:
•Place the documents face down with the top to the left as shown in A. The long side is the top for landscape mode and the short side is the top for portrait mode.
•Lift the documents holding the both ends with both hands.
•Hold the documents tightly with your left hand and bend the documents as shown in B.
•Grip tightly with your right hand, loosen the grip of your left hand, and straighten the documents as shown in C.
•Repeat these operations until the top is angled 20° or less as shown in D.
Top
A
(For portrait mode)
B
D
20° or less
C
4 – 7
