Software Issues
This section describes software specific issues and workarounds.
XCP Issues and Workarounds
TABLE 3 lists known XCP issues and possible workarounds.
TABLE 3 XCP Issues and Workarounds
ID | Description | Workaround |
|
|
|
RTIF1- While XSCF is running, a process may go
RTIF1- While XSCF is running, watchdog timeout
RTIF1- Using the XSCF Web, when you selected SSH
RTIF1- When you display the Logical tree on the
or memory which assigned to the domain appears differently from the actual domain configuration.
RTIF1- On the XSCF Web, when you select Domain
settings, the
RTIF1- On the XSCF Web, on the Domain Status
the Domain Component List, and in case the selected XSB is not yet mounted or is
Check that XSCF is started. If not started, use the rebootxscf(8) command to restart XSCF, or stop all the domains and then execute the system power off/on (AC OFF/ON).
Check that XSCF is started. If not started, use the rebootxscf(8) command to restart XSCF, or stop all the domains and then execute the system power off/on (AC OFF/ON).
To specify the value which exceeds the maximum number of character input for the XSCF Web, use XSCF Shell.
On the Menu, select Device Status to refer to the domain hardware configuration. Or use the showdevices(8) command to refer to the domain hardware configuration.
Select Domain Mode Configuration one more time and perform the settings. Or once terminate the XSCF Web and then perform the settings.
None available at this time.
10 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1060 • November 2007