Software Documentation Updates

This section contains late-breaking software information that became known after the documentation set was published and corrections in the SPARC Enterprise M8000/M9000 servers software documentation.

The corrections for SPARC Enterprise M4000/M5000/M8000/M9000 servers XSCF Reference Manual, if not otherwise specified, also apply to the man pages which XSCF provides. And they supersede the information on the man pages.

TABLE 5 lists known documentation updates.

TABLE 5 Documentation Updates

Title

Page Number

Update

 

 

 

All SPARC Enterprise M8000/M9000 servers documentation

SPARC Enterprise

setpowerupde

M4000/M5000/M8000/

lay(8) man

M9000 Servers XSCF

page

Reference Manual

 

 

setupplatfor

 

m(8) man page

All DVD references are now referred to as CD-RW/DVD-RW.

The following description is added in EXTENDED DESCRIPTIOIN:

When the power is turned on from the operator panel, the wait time and warm-up time that you set are ignored. If you have set these times and wish to observe them at startup, perform the poweron(8) command.

The -p user option requires useradm privileges.

The -p network option requires either platadm or fieldeng privileges.

The -p altitude option requires platadm privileges.

The -p timezone option requires platadm privileges.

SPARC Enterprise M8000/M9000 Servers Product Notes 31