TABLE 3 XCP Issues and Workarounds (Continued)

ID

Description

Workaround

 

 

 

RTIF1- On the XSCF Web, when you changed the 070824-005 Refresh Interval value of the Monitor Message

Frame, the invalid pop-up "Confirmation Domain mode" may appear.

RTIF1- On the tab browser, to the same host, when 070824-006 you perform multiple log-in with the user

accounts of different user privileges, the user privilege of the last log-in user account will be applied to those pages which you've already logged in.

RTIF1- On the Domain Configuration screen, when 070824-008 you select an undefined Domain ID, the

Configuration Policy remains as the content which previously displayed.

RTIF1- While using FireFox2, in the Configuration 070824-011 policy setting on the Domain Configuration

screen, when you specify a domain which is in operation, an error display pop-up appears. When you click on the Back button on this error display pop-up and click on the Cancel button on the inquiry screen to re-display the data, the system remains in the error message screen.

RTIF1- CLIs should display "Permission denied" when 070904-001 it is executed in Standby XSCF.

RTIF1- An incorrect domain state is reported. After 070904-003 the command sendbreak(8) to domain is

issued, showdomainstatus(8) continues to show the state as "Running" when the domain is actually at "ok" prompt.

RTIF1- The latest communication field in

070904-004 showarchiving(8) command is not updated regularly.

RTIF1- While executing the domain power-on,

070904-006 domain reset or DR, in case the XSCF reboot occurred, the process may be aborted in some or all of the XSB.

Ignore the pop-up and close the screen.

When you use the tab browser, do not perform multiple log-in to the same host.

None available at this time.

From the Menu, select the Domain

Configuration page again.

Only the following CLIs can be executed on the Standby XSCF: snapshot(8), switchscf(8).

Do not attempt to run any other CLI on the Standby. Such attempts will report various errors.

There is no workaround. This is expected behavior of the sendbreak(8) operation.

Disabling and re-enabling archiving refreshes the Latest communication field in showarchiving(8) output.

Execute the domain reset one more time, or power off the domain and then power on again.

SPARC Enterprise M8000/M9000 Servers Product Notes 11