TABLE 4 Specific Issues and Workarounds Concerning Solaris (Continued)
CR ID | Description | Workaround |
|
|
|
6539084 There is a low probability of a domain panic during reboot when the Sun Quad GbE UTP x8 PCIe
6539909 Do not use the following I/O cards for network access when you are using the boot net install command to install the Solaris
OS:
•
•
6542632 Memory leak in PCIe module if driver attach fails.
6545143 When kcage daemon is expanding the kcage area, if the user stack exists in the expanded area, its area is demapped and might cause a ptl_1 panic during the flushw handler execution.
6545685 If the following message displayed on the OS console, memory degradation or XSB deconfiguration may occur in the subsequent reboot.
There is no workaround.
This bug has been fixed in
When running Solaris 10 11/06, use an alternate type of network card or onboard network device to install the Solaris OS via the network.
There is no workaround.
This bug has been fixed in Solaris 10 8/07.
There is no workaround. Check for the availability of a patch for this defect.
Add the following to /etc/system and then reboot the domain:
set
Example:
6546188 The system panics when running hotplug (cfgadm(1M)) and DR operations (addboard(8) and deleteboard(8)) on the following cards:
•
•
There is no workaround.
For Solaris 10 8/07, check for the patch 127741- 01 for this defect.
For Solaris 10 11/06, check for the patch
SPARC Enterprise M8000/M9000 Servers Product Notes 21