TABLE 4 Specific Issues and Workarounds Concerning Solaris (Continued)
CR ID | Description | Workaround |
|
|
|
6522017 DR and ZFS may not be used in the same domain.
Reduce the amount of kernel memory that ZFS can allocate by setting the zfs_arc_max parameter in the /etc/system file. The following example sets the maximum size to 512 Mbytes.
6522433 After the CPU hardware error occurred, the fmdump(1M) command on the domain may display an incorrect faulty component.
6527781 The cfgadm command fails while moving the DVD/DAT drive between two domains.
6527811 The showhardconf(8) command on the XSCF cannot display PCI card information that is installed in External I/O Expansion Unit, if the External I/O Expansion Unit is configured using PCI hotplug.
6529714 Warning messages occur while trying to configure more than four
6530288 Ap_Id format may not be shown correctly by cfgadm(1M) command.
6530753 Some of the PCI slots in the External I/O Expansion Unit PCI slots are not displayed during a normal boot operation.
6531036 The error message network initialization failed appears repeatedly after a boot net installation.
6531668 System hangs when executing parallel hot plug operation with SP DR in suspend phase.
set zfs_arc_max = 0x20000000
Check system status on XSCF.
There is no workaround. To reconfigure DVD/Tape drive, execute reboot
This bug has been fixed in Solaris 10 8/07.
There is no workaround. When PCI card in the External I/O Expansion Unit is configured using PCI hotplug, the PCI card information is displayed correctly.
No workaround available at this time.
None available at this time.
This bug has been fixed in Solaris 10 8/07.
Use one of the following operations to display all of the PCI slots.
•boot
•devfsadm
•cfgadm (twice at Solaris prompt)
There is no workaround.
No workaround available at this time.
SPARC Enterprise M8000/M9000 Servers Product Notes 19