TABLE 3 XCP Issues and Workarounds (Continued)

ID

Description

Workaround

 

 

 

RTIF1- When you set the XSCF user account name to 070914-006 the maximum 32 characters, you can log in,

but then, when you execute the XSCF Shell or operate the XSCF Web, "Permission denied" occurs.

RTIF1- The CLI 'showldap -c' (which displays 070914-019 current LDAP certificates) will show proper

data only when used with the same user account that had originally provided certificate information using 'setldap -c'. Any other user account will generate "Permission denied" error. Similarly, the XSCF Web’s LDAP Configuration pop-up screen will display no data, when a different user account is used.

RTIF1- On the User Account setting page on the User 070914-020 Manager screen, after the password change

resulted in "Change Password Error," when you click on the REFRESH button, there appears the error message "No user. The request is aborted."

RTIF1- During the Open BootPROM process, when 070914-021 you power off the domain, the error log of

Domain hang-up detected (level3) may be registered.

RTIF1- When you specify the domain ID or XSB 070914-023 number which are not supported on the

machine, there appears the parameter error message.

RTIF1- When you execute XCP Sync on the Firmware 070914-025 Update page, after 15 minutes, the error

message "Another flashupdate is now processing" or "The page cannot be displayed" may appear.

RTIF1- The XSCF firmware monitors itself and if it 071102-001 detects any inconsistencies, it forces an XSCF

reboot.

RTIF1- The snmp daemon might quit. 071102-002

Use up to 31 characters to set the XSCF user account name.

Use the same user account for all LDAP display or configuration operations, for both CLI and XSCF Web.

To change the password, select User Manager on the Menu again.

This error log can be safely ignored.

To specify the available domain ID or XSB number on the machine.

None available at this time. However, the XCP Sync process has been continuously executed. Check the XSCF update completion message on the monitoring message to confirm the completion of Sync process.

There is no workaround. Allow the XSCF Unit to finish rebooting. It returns to normal operation within approximately 5 minutes.

To restart the snmp daemon, issue the command setsnmp enable.

12 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1060 • November 2007