Manuals / Fujitsu / Computer Equipment / Computer Drive

Fujitsu MHV2060AT, MHV2100AT, MHV2080AT, MHV2120AT Important Alert Items, Important Alert Messages

Models: MHV2040AT MHV2100AT MHV2060AT MHV2080AT MHV2120AT

1 280

Download 280 pages 1.69 Kb

Page 9

Important Alert Items

Important Alert Messages

The important alert messages in this manual are as follows:

A hazardous situation could result in minor or moderate personal injury if the user does not perform the procedure correctly. Also, damage to the product or other property, may occur if the user does not perform the procedure correctly.

Task	Alert message	Page

Normal Operation	Data corruption: Avoid mounting the disk near strong	3-7
	magnetic sources such as loud speakers. Ensure that the disk
	drive is not affected by external magnetic fields.
	Damage: Do not press the cover of the disk drive. Pressing
	it too hard, the cover and the spindle motor contact, which
	may cause damage to the disk drive.
	Static: When handling the device, disconnect the body
	ground (500 kΩ or greater). Do not touch the printed circuit
	board, but hold it by the edges.
	Damage: Interface cable connection	3-10
	Take not of the following precaution about plugging an
	interface cable (socket) into the interface connector of the
	disk drive and plugging the connector into a host receptacle:
	• When plugging together the disk drive interface connector
	and the host receptacle or interface cable connector
	(socket), do not apply more than 10 kgf of force in the
	connection direction once they are snugly and securely in
	position.

C141-E218

v

Image 9

Fujitsu MHV2060AT, MHV2100AT, MHV2080AT Important Alert Items, Important Alert Messages, Damage Interface cable connection

Contents

Disk Drive Product Manual MHV2120AT, MHV2100AT, MHV2080AT MHV2060AT, MHV2040AT Handling of This Manual For Safe Operation Revision History This page is intentionally left blank Overview of Manual Preface Conventions for Alert Messages Operating EnvironmentConventions Liability Exception This page is intentionally left blank Important Alert Items Important Alert MessagesDamage Interface cable connection This page is intentionally left blank Disk Drive Maintenance Manual Manual OrganizationDisk Drive Product Manual This page is intentionally left blank Contents Theory of Device Operation Installation Conditions Interface Contents 101 Write Multiple EXT X’39’ Option customizing Operations Glossary GL-1 Acronyms and Abbreviations AB-1 Index IN-1 Figures Illustrations Execution example of Read Multiple command Tables Surface temperature measurement points and standard 25 Relationship between combination of Identifier This page is intentionally left blank Device Overview Features Functions and performanceAdaptability High resistance against shock Error correction and retry by ECCConnection to ATA interface Data buffer Device Specifications Specifications summarySpecifications 1 Specifications 2 Model and product numberExamples of model names and product numbers Power Requirements Input VoltageRipple Current and power dissipation Current Requirements and Power Dissipation Current fluctuation Typ. at +5 V when power is turned on Environmental SpecificationsPower on/off sequence Environmental specifications Shock and vibration specification Acoustic noise specificationAcoustic Noise Shock and Vibration Data assurance in the event of power failure Service lifeReliability Mean time between failures Mtbf Unrecoverable read error Error RatePositioning error Media Defects Advanced Power Management Advanced Power Management Advanced Power Management This page is intentionally left blank Device Configuration Device Configuration ATA interface System Configuration2 1 drive connection Read/write circuit 3 2 drives connection 2 drives configuration Installation Conditions Dimensions Dimensions Mounting Integration Guidance C141-E144Orientation Frame Limitation of mountingPCA Location of breather Ambient temperature Handling cautions Service area Handling cautions Cable Connections Device connector Cable connector specifications Cable connector specificationsDevice connection FCI Jumper Settings Power supply connector CN1Location of setting jumpers Master drive-slave drive setting Factory default setting 14 Csel setting Csel setting 16 Example 2 of cable select Power up in standby setting Theory of Device Operation Subassemblies OutlineDisk Spindle Air filter Circuit ConfigurationServo circuit Spindle motor driver circuit Power supply configuration PCA Power-on operation sequence Power-on Sequence Self-calibration Self-calibration contents Execution timing of self-calibration Command processing during self-calibration Read/write preamplifier PreAMP Read/write CircuitWrite circuit Write precompensation Read circuit AGC circuitProgrammable filter circuit FIR circuit Digital PLL circuitD converter circuit Viterbi detection circuit Servo control circuit Servo Control Microprocessor unit MPU Power amplifierServo burst capture circuit A converter DAC VCM current sense resistor CSR Driver circuit Inner guard band Data-surface servo formatData area Outer guard band Physical sector servo configuration on disk surface Servo frame format Operation to move the head to the reference cylinder Actuator motor controlSeek operation Track following operation Acceleration mode Start modeStable rotation mode Spindle motor control This page is intentionally left blank Interface Physical Interface Interface signals Signal assignment on the interface connector Signal assignment on the connectorDA1 PDIAG-, Cblid DA0 DA2 Dasp GND Diow MstrStop Dior Cblid PdiagDasp Iordy Logical Interface 1 I/O registers I/O registersDA2 DA1 DA0 Error register X’1F1’ Command block registersData register X’1F0’ UNC Idnf Features register X’1F1’ SET Multiple ModeSector Count register X’1F2’ Sector Number register X’1F3’ Cylinder Low register X’1F4’Cylinder High register X’1F5’ DEV HS3 HS2 HS1 HS0 Device/Head register X’1F6’Status register X’1F7’ BSY Interface Command register X’1F7’ Control block registersAlternate Status register X’3F6’ Command code and parameters Host CommandsDevice Control register X’3F6’ HOB Srst Parameter Used Command code and parameters 1 EXT Write Multiple FUA EXT Flush Cache EXT Command code and parameters 2 Host Commands Command descriptions Host Commands Recalibrate X’10’ to X’1F’ MSB Read Sectors X’20’ or X’21’ End head No. / LBA MSB Write Sectors X’30’ or X’31’ 1F7HST Status information 1F6HDH Write Verify X’3C’ Read Verify Sectors X’40’ or X’41’ Seek X’70’ to X’7F’ Diagnostic code Execute Device Diagnostic X’90’ Host Commands Initialize Device Parameters X’91’ Download Microcode X’92’ Operation of Download Microcode Standby Immediate X’94’ or X’E0’ Unload Feature Unload Immediate Command Host Commands Standby X’96’ or X’E2’ Idle X’97’ or X’E3’ Interface ’FF’ Check Power Mode X’98’ or X’E5’ Sleep X’99’ or X’E6’ Smart X’B0 Features register values subcommands and functions 1 Smart Enable Operations Features register values subcommands and functions 2Smart Disable Operations Smart Read LOG Features register values subcommands and functions 3 ’DB’ Smart ENABLE/DISABLE Auto OFF-LINESmart Return Status Host Commands Format of device attribute value data 1FFFormat of insurance failure threshold value data Attribute ID Data format version number Current attribute value Status FlagAttribute value for the worst case so far Raw attribute value 10 Off-line data collection status Self-test execution status11 Self-test execution status 12 Off-line data collection capability Off-line data collection capabilityFailure prediction capability flag 13 Failure prediction capability flag 14 Error logging capability Error logging capabilityCheck sum Insurance failure threshold Smart error logging 16 Data format of Smart Summary Error Log Error data structure Command data structureTotal number of drive errors 17 Data format of Smart Comprehensive Error Log 18 Smart self-test log data format Smart self-test1FC Self-test number Test span 19 Selective self-test log data structureCurrent LBA under test Current span under test Feature flags 20 Selective self-test feature flagsSelective self-test pending time min Device Configuration Restore Device Configuration XB1Device Configuration Freeze Device Configuration Identify Device Configuration Freeze Lock FR = C1h Device Configuration Restore FR = C0hDevice Configuration Identify FR = C2h Device Configuration SET FR = C3h Interface 21 Device Configuration Identify data structure Interface Read Multiple X’C4’ Execution example of Read Multiple command MSB Write Multiple X’C5’ Interface SET Multiple Mode X’C6’ Interface Read DMA X’C8’ or X’C9’ End head No. / LBA MSB Write DMA X’CA’ or X’CB’ Interface Read Buffer X’E4’ Flush Cache X’E7’ Write Buffer X’E8’ Identify Device X’EC’ Identify Device DMA X’EE’ ’3FFF’ 22 Information to be read by Identify Device command 1 22 Information to be read by Identify Device command 2 Word Command without interrupt supports 2, 4, 8 and 16 sectors = Supports the Host Protected Area feature set = Supports the CFA Compact Flash Association feature set Interface Host Commands Interface Host Commands Word Bit Reserved Security level High, 1 Maximum 23 Features register values and settable modes SET Features X’EF’’BB’ ’CC’ Data Transfer Mode Advanced Power Management APM Automatic Acoustic Management AAM 24 Contents of Security SET Password data At command issuance I-O register contents 1F7hCM When the master password is selected When the user password is selectedSecurity UNLOCKX’F2’ Interface Security Erase Prepare X’F3’ Security Erase Unit X’F4’ Security Freeze Lock X’F5’ At command issuance I-O register contents 1F7hCM 26 Contents of security password Interface Read Native MAX Address X’F8’ SET MAX Address SET MAX X’F9’ SET MAX SET Password FR = 01h SET MAX Lock FR = 02h SET MAX Unlock FR = 03h SET MAX Freeze Lock FR = 04h Host Commands Read Sectors EXT X’24’ Option customizing Description Read DMA EXT X’25’ Option customizing Description Error reporting conditions Read Multiple EXT X’29’ Option customizing Description Read LOG EXT X2F Optional command Customize Description Host Commands Write Sectors EXT X’34’ Option customizing Description Write DMA EXT X’35’ Option customizing Description SET MAX Address EXT X’37’ Option customizing Description SET MAX LBA Write Multiple EXT X’39’ Option customizing Description Write DMA FUA EXT X’3D’ Option customizing Description Write LOG EXT X’3F’ Optional command Customize Description Host Commands Read Verify Sectors EXT X’42 Option customizing Description Write Multiple FUA EXT X’CE’ Option customizing Description Flush Cache EXT X’EA’ Option customizing Description 27 Command code and parameters 1 Error posting 27 Command code and parameters 2 Command Protocol PIO Data transferring commands from device to hostExecute Device Diagnostic Initialize Device Parameters Read Sectors Command protocol Protocol for command abort PIO Data transferring commands from host to device Write Sectors command protocol Commands without data transfer DMA data transfer commands Other commandsRead Multiple EXT Write Multiple EXT/FUA EXT Sleep Read DMA EXT Write DMA EXT/FUA EXT Indentify Device DMA Normal DMA data transfer Overview Ultra DMA Feature Set Phases of operation Ultra DMA data in commandsInitiating an Ultra DMA data in burst Data in transfer Pausing an Ultra DMA data in burst Terminating an Ultra DMA data in burst Ultra DMA Feature Set Interface Initiating an Ultra DMA data out burst Ultra DMA data out commands Data out transfer Pausing an Ultra DMA data out burst Terminating an Ultra DMA data out burst Interface Ultra DMA CRC rules 28 Recommended series termination for Ultra DMA Series termination required for Ultra DMADIOR-HDMARDY-HSTROBE DIOW-STOP Timing PIO data transferPIO data transfer timing Multiword data transfer 10 Multiword DMA data transfer timing mode 11 Initiating an Ultra DMA data in burst Ultra DMA data transfer Strobe Name Mode Comment MIN MAX 29 Ultra DMA data burst timing requirements 2 30 Ultra DMA sender and recipient timing requirements Mode Name Comment Dstrobe at device Sustained Ultra DMA data in burstDD150 at device Dstrobe at host DD150 at host Dmarq Host pausing an Ultra DMA data in burstDmack Hdmardy Stop Device terminating an Ultra DMA data in burst Host terminating an Ultra DMA data in burst HostDA0, DA1, DA2 CS0, CS1 16 Initiating an Ultra DMA data out burst Sustained Ultra DMA data out burst Hstrobe at host DD150 at hostHstrobe at device DD150 at device Device pausing an Ultra DMA data out burst Device DMACK- host Stop host DDMARDY- deviceHstrobe host DD150 Host 19 Host terminating an Ultra DMA data out burst Host terminating an Ultra DMA data out burst Device terminating an Ultra DMA data out burst Dmarq device DMACK- hostDD150 Host Power-on and reset Master and slave devices are present 2-drives configurationOnly master device is present Operations Response to power-on Device Response to the Reset Response to power-on Response to hardware reset Response to hardware reset Response to software reset Response to software reset Response to diagnostic command Response to diagnostic command Power save mode Power SaveActive mode Active idle mode Sleep mode Standby mode Power commands Defect ProcessingSpare area Alternating processing for defective sectors Sector slip processingTrack slip processing Automatic alternating processing Automatic alternating processing Read-ahead Cache Data buffer structure8MB buffer 8,388,608 bytes Caching operation Commands that are targets of cachingData that is a target of caching Invalidating caching-target data Smart Miss-hit Using the read segment buffer Sequential hit Full hit Partial hit Write Cache Command that are targets of cachingCache operation Invalidation of cached data Reset response Status report in the event of an errorCaching function when power supply is turned on Enabling and disabling Write Cache This page is intentionally left blank Glossary Rotational delay Power save modePIO Programmed input-output Positioning VCM Status This page is intentionally left blank Acronyms and Abbreviations This page is intentionally left blank AAM Index Index Host terminating ultra DMA data Read Native MAX Address Read Sectors Command Surface temperature measurement This page is intentionally left blank Japan Comment Form This page is intentionally left blank C141-E218-01EN MHV2120AT, MHV2100AT, MHV2080AT, MHV2060AT, MHV2040AT This page is intentionally left blank