Fujitsu MHV2100BH, MHV2080BH, MHV2040BH, MHV2060BH manual 3.1

Contents

	5.2.3.1		FIS types	5-17
	5.2.3.2		Register - Host to Device	5-17
	5.2.3.3		Register - Device to Host	5-18
	5.2.3.4 DMA Active - Device to Host			5-18
	5.2.3.5 DMA Setup - Device to Host or Host to Device
			(Bidirectional)	5-19
	5.2.3.6		BIST Active - Bidirectional	5-20
	5.2.3.7 Data - Host to Device or Device to Host (Bidirectional)			5-21
5.2.4	Shadow block registers			5-22
5.3 Host Commands				5-27
5.3.1 Command code and parameters				5-27
5.3.2	Command descriptions			5-30
	(1)	RECALIBRATE (X’10’ to X’1F’)		5-31
	(2)	READ SECTOR(S) (X’20’ or X’21’)		5-32
	(3)	WRITE SECTOR(S) (X’30’ or X’31’)		5-34
	(4)	WRITE VERIFY (X’3C’)		5-36
	(5)	READ VERIFY SECTOR(S) (X’40’ or X’41’)		5-38
	(6)	SEEK (X’70’ to X’7F’)		5-40
	(7)	EXECUTE DEVICE DIAGNOSTIC (X’90’)		5-41
	(8)	INITIALIZE DEVICE PARAMETERS (X’91’)		5-42
	(9)	DOWNLOAD MICROCODE (X’92’)		5-43
	(10)	STANDBY IMMEDIATE (X’94’ or X’E0’)		5-45
	(11)	IDLE IMMEDIATE (X’95’ or X’E1’)		5-46
	(12)	STANDBY (X’96’ or X’E2’)		5-47
	(13)	IDLE (X’97’ or X’E3’)		5-48
	(14)	CHECK POWER MODE (X’98’ or X’E5’)		5-50
	(15)	SLEEP (X’99’ or X’E6’)		5-51
	(16)	SMART (X’B0’)		5-52
	(17)	DEVICE CONFIGURATION (X'B1')		5-69
	(18)	READ MULTIPLE (X’C4’)		5-74
	(19)	WRITE MULTIPLE (X’C5’)		5-77
	(20)	SET MULTIPLE MODE (X’C6’)		5-79
	(21)	READ DMA (X’C8’ or X’C9’)		5-81
	(22)	WRITE DMA (X’CA’ or X’CB’)		5-83
	(23)	READ BUFFER (X’E4’)		5-85

xii C141-E224