Fujitsu MPF3XXXAT manual Operations

5.6.3.5	Device terminating an Ultra DMA data in burst	5	- 93
5.6.3.6	Host terminating an Ultra DMA data in burst	5	- 94
5.6.3.7	Initiating an Ultra DMA data out burst	5	- 95
5.6.3.8	Sustained Ultra DMA data out burst	5	- 96
5.6.3.9	Device pausing an Ultra DMA data out burst	5	- 97
5.6.3.10 Host terminating an Ultra DMA data out burst		5	- 98
5.6.3.11 Device terminating an Ultra DMA data in burst		5	- 99
5.6.4	Power-on and reset	5	- 100
CHAPTER 6 OPERATIONS		6	- 1
6.1	Device Response to the Reset	6	- 1
6.1.1	Response to power-on	6	- 2
6.1.2	Response to hardware reset	6	- 3
6.1.3	Response to software reset	6	- 4
6.1.4	Response to diagnostic command	6	- 5
6.2	Address Translation	6	- 6
6.2.1	Default parameters	6	- 6
6.2.2	Logical address	6	- 7
6.3	Power Save	6	- 8
6.3.1	Power save mode	6	- 8
6.3.2	Power commands	6	- 10
6.4	Defect Management	6	- 10
6.4.1	Spare area	6	- 11
6.4.2	Alternating defective sectors	6	- 11
6.5	Read-Ahead Cache	6	- 13
6.5.1	Data buffer configuration	6	- 13
6.5.2	Caching operation	6	- 14
6.5.3	Usage of read segment	6	- 15
6.6	Write Cache	6	- 20

x C141-E099-01EN