Fujitsu N6400 manual Memory Problems, Modem Problems, USB Device Problems, PC Card Problems

Models: N6400

1 112
Download 112 pages 15.17 Kb
Page 60
Image 60

L i f e B o o k N S e r i e s U s e r ’ s G u i d e

Problem

Possible Cause

Possible Solutions

 

 

 

 

 

 

You have connected an

Your system has crashed.

Try to restart your LifeBook notebook. If that fails,

external keyboard or a

 

turn off the power using the power/suspend/resume

mouse and it seems to be

 

button, wait at least 10 seconds, and then power on.

locking up the system.

 

If turning off power with the power/suspend/resume

(continued)

 

button fails, the button has likely been set to

 

suspend or hibernate. In that case, disconnect the

 

 

 

 

power cord, then remove and re-insert the battery.

 

 

 

Memory Problems

 

 

 

 

 

Your Power On screen, or

Your memory upgrade module

Remove and reinstall your memory upgrade

Main menu of the BIOS

is not properly installed.

module. (See Memory Upgrade Module page 45 for

setup utility information,

 

more information)

does not show the correct

 

 

You have a memory failure.

Check for Power On Self Test (POST) messages.

amount of installed

 

(See Power On Self Test Messages page 59 for more

memory.

 

 

information)

 

 

 

 

 

Modem Problems

 

 

 

 

 

Messages about modem

Messages about operation are

See your application software documentation for

operation.

generated by whichever

additional information.

 

modem application is in use.

 

 

 

 

USB Device Problems

 

 

 

 

 

You have installed a USB

The USB device is not properly

Verify the USB is properly installed by unplugging

device, but your LifeBook

installed and/or powered.

and replugging the plug. Also, verify that sufficient

notebook does not recog-

 

power is available to the USB device.

nize the device, or the

 

 

The USB port is not enabled in

Verify the USB port is set to Enabled in the BIOS.

device does not seem to

the BIOS.

(See Entering the BIOS Setup Utility page 27 for more

work properly.

 

information)

 

 

 

 

 

 

The device is not properly

Remove and reinstall the device. (See Device Ports

 

installed.

page 47 for more information)

 

 

 

 

The device may have been

Close the application and restart your LifeBook

 

installed while an application

notebook.

 

was running, so your notebook

 

 

is not aware of its installation.

 

 

 

 

 

Your software may not have

See your software documentation and activate the

 

correct software driver active.

correct driver.

 

 

 

 

You may have the wrong I/O

See your device documentation and software docu-

 

address selected for your

mentation to determine the required I/O address.

 

device.

Change the settings in the BIOS setup utility. (See

 

 

BIOS Setup Utility page 29 for more information)

 

 

 

 

Your device and another device

Check all I/O addresses located within the BIOS

 

are assigned the same I/O

setup utility and any other installed hardware or

 

address.

software to make sure there are no duplications.

 

 

 

PC Card Problems

 

 

 

 

 

A card inserted in the PC

The card is not properly

Remove and reinstall the card. (See Removing PC

Card slot does not work or

installed.

Cards page 43 for more information)

is locking up the system.

 

 

Your software may not have

See your software documentation and activate the

 

 

the correct driver active.

correct driver.

 

 

 

54

Page 60
Image 60
Fujitsu N6400 manual Memory Problems, Modem Problems, USB Device Problems, PC Card Problems