Chapter 2 Setup
Device Specific Setup Parameters (differences only)
|
|
| Target Type |
| |
Setting item | Parameter | ETERNUS | ETERNUS | ETERNUS8000, | |
GR710, GR720, | GR740, GR820, | ||||
ETERNUS4000, | |||||
|
| GR730, | GR840, | ||
|
| ETERNUS2000 | |||
|
| ETERNUS3000 | ETERNUS6000 | ||
|
|
| |||
|
| Default setting is | Default setting is | Default setting is | |
Target Device |
| "GR710", | "GR740", | "ETERNUS8000", | |
TARGET_TYPE | "GR720", | "GR820", | "ETERNUS4000", | ||
(may be changed) | |||||
| "GR730", or | "GR840", or | or | ||
|
| ||||
|
| "ETERNUS3000" | "ETERNUS6000" | "ETERNUS2000" | |
|
|
|
|
| |
Target Flag (can- | TARGET_FLAG | Fixed at "1" | Fixed at "2" | Fixed at "4" | |
not be changed) | |||||
|
|
|
| ||
|
|
|
|
|
2.2Modifying the ETERNUSmgr Setup
2
This section explains how to change the setup of ETERNUSmgr for Solaris OS, Linux, or Windows®. Use a text editor to modify the setup file. Any text editor can be used as none has been specified.
2.2.1ETERNUSmgr for Solaris OS and Linux Procedure
This section explains what to do for the Solaris OS and Linux versions of ETERNUSmgr. The procedure shown is for changing the settings that were set during installation.
This explanation uses ETERNUSmgr's default installation directory "/opt/FJSVgrmgr/" as an example.
Procedure 
1Confirm the contents of the installation directory.
Make sure that the necessary files and directories (stxchk, _STXPOLL.INI, STXPOLL_1.INI, stx- poll, stxpolld, www/) have all been installed.
# ls /opt/FVSVgrmgr/
stxchk _STXPOLL.INI STXPOLL_1.INI stxpoll stxpolld www/
2Edit the STXPOLL_1.INI file.
Vi editor is used here.
#vi /opt/FJSVgrmgr/STXPOLL_1.INI
When setting up multiple target devices, copy an existing setup file to make the setup easier. For details on how to do this, see "2.5 Monitoring Multiple Target Devices" (page 27).
All Rights Reserved, Copyright © FUJITSU LIMITED 2007
11
