Fujitsu P2X0-0202-01EN manual ETERNUSmgr for Solaris OS and Linux

Models: P2X0-0202-01EN

1 66
Download 66 pages 13.13 Kb
Page 40
Image 40

3.1 ETERNUSmgr for Solaris OS and Linux

As explained in "2.1 Setup files" (page 9) ETERNUSmgr treats any file that conforms to the "STX~.INI" format as a setup file and loads it accordingly. If ETERNUSmgr detects multiple setup files (for multiple devices), it will load all of them.

ETERNUSmgr automatically reads the setup file(s) at startup. If it fails to locate or read any setup files, the following message is displayed and startup is terminated.

stxchk: ETERNUSmgr could not start.

Error detail: No INI file.

*** stxpoll could not start. ***

ETERNUSmgr determines the device that is to be monitored according to the "TARGET_ADDR" param- eter specified in the setup file and accesses it accordingly. If a "TARGET_ADDR" parameter is not speci- fied, or if it is incorrect, the following message is displayed and startup is terminated.

stxchk: ETERNUSmgr could not start.

Error detail: Invalid host name was defined at "STXPOLL_1.INI".

Please check "TARGET_ADDR" parameter in this file.

*** stxpoll could not start. ***

Note:

"STXPOLL_1.INI" indicates the name of the setup file in which the error was actually detected.

If ETERNUSmgr detects the "TARGET_ADDR" parameter to be missing, incorrect, or duplicated in mul- tiple setup files, the following message is displayed and startup is terminated.

stxchk: ETERNUSmgr could not start.

Error detail: Invalid host name were defined at following INI files.

Please check "TARGET_ADDR" parameter in these files.

STXPOLL_1.INI

STXPOLL_2.INI

*** stxpoll could not start. ***

Note:

"STXPOLL_1.INI" and "STXPOLL_2.INI" indicate the name of the setup files in which the error was actually detected.

If any such messages are displayed on the screen when ETERNUSmgr is starting up, check that a setup file exists and all parameter settings are correct.

In addition, the contents of all the displayed messages are logged in the "stxchk.sts" file stored in the direc- tory in which ETERNUSmgr is installed (this file will be empty if ETERNUSmgr has started up nor- mally).

32

ETERNUSmgr User Guide -Introduction- P2X0-0202-01EN

All Rights Reserved, Copyright © FUJITSU LIMITED 2007

Page 40
Image 40
Fujitsu P2X0-0202-01EN manual ETERNUSmgr for Solaris OS and Linux