Chapter 3 Startup and Shutdown
●For Windows Server® 2003 or Windows Server® 2003 R2
3.2.2Shutting Down ETERNUSmgr
Perform the following to manually shutdown ETERNUSmgr for Windows®:
Procedure 
1Select the [STXPOLL] service from [Services] on the [Administrative Tools] of the [Control Panel], and click the [Stop] button.
3.2.3Registering the ETERNUSmgr Service for Automatic Startup
3
After installation is completed, ETERNUSmgr for Windows® is already registered as an automatic startup service that will become active the next time the server is rebooted, so there is no need to manually set ETERNUSmgr for automatic startup.
If, for any reason, the ETERNUSmgr automatic startup setting is disabled, do the following to restore it. This setting will be enabled at the next server reboot.
Procedure 
1Select the [STXPOLL] service from [Services] on the [Administrative Tools] of the [Control Panel], then set the startup method to: [Automatic].
To disable automatic startup of ETERNUSmgr, set the startup method to [Manual] in the above procedure.
P2X0-0202-01EN ETERNUSmgr User Guide -Introduction-
All Rights Reserved, Copyright © FUJITSU LIMITED 2007
37
