Chapter 3 Startup and Shutdown
• When no setup files exist, or none can be read:
• When a "TARGET_ADDR" is not specified in a setup file, or is incorrect:
3
Note:
•"TARGET_ADDR" is the parameter that specifies the address of the target device.
•"STXPOLL_1.INI" indicates the name of the setup file in which the error was actually detected.
•When a "TARGET_ADDR" is missing, incorrect, or duplicated in multiple setup files:
Note:
"STXPOLL_1.INI" and "STXPOLL_2.INI" indicate the name of the setup files in which the error was actually detected.
If ETERNUSmgr detects more than 10 faulty setup files, the first 10 will be listed along with the total number of faulty files.
P2X0-0202-01EN ETERNUSmgr User Guide -Introduction-
All Rights Reserved, Copyright © FUJITSU LIMITED 2007
35
