6.4 Log Messages
Can't Allocate Memory (CODE 905)
[Explanation] | Failed to reserve an open area in memory. |
[Response] | Allocate the necessary memory. |
Bad IP Address "host name or IP address" (CODE 906)
[Explanation] | The specified target IP address is invalid. |
[Response] | Set the correct IP address. |
Can't Create Directory "path" (CODE 908) | |
[Explanation] | Failed to create a directory. |
[Response] | Confirm your access permissions to the directory. |
| Confirm that the name of the specified directory is correct. |
Not NULL Parameter "parameter" (CODE 909) | |
[Explanation] | NULL is not allowed for this parameter setting. |
[Response] | Set the parameter. |
Not Find Parameter "parameter" (CODE 910) | |
[Explanation] | This parameter setting cannot be found. |
[Response] | Set the parameter. |
Parameter too long "parameter" (CODE 911) | |
[Explanation] | Too many characters are used in this parameter setting. |
[Response] | Correct the parameter setting. |
Directory Name too long "directory name" (CODE 912)
[Explanation] | The directory name is too long. |
[Response] | Set a shorter directory name. |
Bad Parameter (CODE 913) | |
[Explanation] | The "TARGET_FLAG" parameter is either incorrect or not set. |
[Response] | Correct the "TARGET_FLAG" parameter. |
52
ETERNUSmgr User Guide -Introduction- P2X0-0202-01EN
All Rights Reserved, Copyright © FUJITSU LIMITED 2007
