Fujitsu P2X0-0202-01EN manual Component#Serial NumberStatus, Serial number

6.3 E-mail Messages

When "SYSYTEMERR(XXXXXXXX)" (XXXXXXXX is an error code) is dis- played, contact your maintenance engineer.

"When a message such as "<Component>#<Serial Number>:<Status>" is dis- played, it indicates a device component and the status. Check the details, and con- tact your maintenance engineer.

When "Hardware Status was changed. See below..." is displayed, the following message may also be dis- played to indicate the location and status of the affected component.

<Component>#<Serial Number>:<Status>

•Component

Indicates the relevant component of the target device. Components vary depending on Target Type, however they are generally as follows:

-ControllerEnclosure

-DriveEnclosure

-BatteryEnclosure

-FCCable

-RCICable

-DEICable

-PANEL

-BatteryUnit

-BatteryChargerUnit

Caution:

See "1.2 ETERNUSmgr Functions" (page 4) for details of which components of each device are monitored.

•Serial number

Indicates the index number of the component. This may differ according to the type of target device, however it is generally in the form of "#nn" or "#nnnn". Some components have no serial numbers, and some always return "#00" or "#0000".

•Status

The following component status conditions are possible:

-	ALARM	A failure has occurred (all components)
-	WARNING	Warning (all components)
-	BTU-CAUTION	Battery replacement limit exceeded (Controller Enclosure, and
		Battery Enclosure)
-	BTU-WARNING	Less than six months to battery replacement limit (Controller
		Enclosure, Battery Enclosure, and Battery Unit)

Caution:

FC cables of ETERNUS3000, ETERNUS GR710, GR720, and GR730 have no WARN-

ING status.

48

ETERNUSmgr User Guide -Introduction- P2X0-0202-01EN

All Rights Reserved, Copyright © FUJITSU LIMITED 2007