Fujitsu P3NK-4452-01ENZD 5.1.1.11 ether egress permission, 5.1.1.12 ether loopdetect use

XG Series User's Guide Chapter 5 Command Reference
Port Information Settings
102
5.1.1.11 ether egress permission
Function Set the forwarding permission port list information.
Available Model XG0224 / XG0448 / XG2600
Syntax ether <number> egress permission <portlist>
Options
<number>
•ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<portlist>
•Forwarding permitted port list
Specify a list of the Ethernet ports that are permitted to forward data.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
Use Mode Configuration mode (admin class)
Explanation Set a port list to allow forwarding via the ports.
If a link aggregation port or a backup port is specified on the port list, forwarding is
allowed via all ports of the link aggregation or backup group.
Default It is assumed that forwarding has been permitted for all ports.
5.1.1.12 ether loopdetect use
Function Set to use the Loop Detection function.
Available Model XG0224 / XG0448 / XG2600
Syntax ether <number> loopdetect use <mode>
Options
<number>
•ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<mode>
•on
Enable the Loop Detection function.
•off
Disable the Loop Detection function.
Use Mode Configuration mode (admin class)
Explanation Set whether or not to enable the loop detection function.
Disable if the system is stopped by the "loopdetect use" definition even if this mode is set
to be effective.
Default It is assumed that the loop detection function is enabled.
ether <number> loopdetect use on