XG Series User's Guide Chapter 5 Command Reference
Configuration Display, Delete and Operation Commands
376
5.19.3.4 commit try time
Function Try to commit (dynamically activate) the candidate config, or re-commit the startup-config
if the try time period expires.
Available Model XG0224 / XG0448 / XG2600
Syntax commit try time <time>
Options
<time>
Specify a time period (from 1m to 24h) until retrieving the startup-config.
The unit shall be d (day), h (hour), or m (minute).
Use Mode Configuration mode (admin class)
Explanation Apply the configuration that was set or changed with the configuration command, without
device restart, and retrieve the startup-config in the specified time.
Caution
During commit try time period the following cannot be executed:
•"commit"
•commit try time
•"save"
If you want to execute these commands, please cancel retrieving the startup-config,
using "commit try cancel" command.
When the configuration is retrieved, complete the cancellation with this command
sequence:
load startup-config
commit
If the startup-config (config0 or config1) is not same the configuration before editing for
try, Old configuration would be lost.
Message
Since "commit try time" command already working, it cannot be applied.
Execute after canceling retrieving the startup-config by the "commit try cancel" command.
An unallowable configuration was created and cannot be applied.
Execute the "reset" command after the "save" command to restart the device.
No configuration is added or changed.
It is not necessary to execute the commit command.
Execution Example
Reference "5.48 Effect by "commit" Command Execution" (pg.543)
<ERROR> Need to do reset after execute the save command.
<ERROR> Waiting switch-back to old configuration
<WARNING> The candidate-config is not changed.
# commit try time 10m commit
#