Fujitsu P3NK-4452-01ENZD 5.8.1.6 stp domain priority

XG Series User's Guide Chapter 5 Command Reference
STP Information
222
5.8.1.6 stp domain priority
Function Set the bridge priority.
Available Model XG0224 / XG0448 / XG2600
Syntax stp domain <instance-id> priority <priority>
Options
<instance-id>
•STP instance ID number
Specify a decimal value from 0 to 15.
For non-MSTP operation mode, entering a value from 1 to 15 makes it invalid, although
the allowable range is set with a value from 0 to 15.
<priority>
•Priority
Specify the priority of this device in the bridge network with a decimal value from 0 to
61440. A smaller value has a higher priority.
Use Mode Configuration mode (admin class)
Explanation Specify the priority of the bridge used for the algorithm for determining the root bridge.
Specify the minimum value for a bridge to be used as a root bridge.
Caution <priority> must be an integer (valid value) that is divisible by 4096.
•Valid values
0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056,
49152, 53248, 57344, 61440
If an integer other than the valid values is specified, this setting is disabled.
Default It is assumed that 32768 is set for the entire instance priority.
stp domain 0 priority 32768