Fujitsu P3NK-4452-01ENZD 5.17 Mode and Terminal Operation

XG Series User's Guide Chapter 5 Command Reference
Mode and Terminal Operation Commands
330
5.17 Mode and Terminal Operation
Commands
This section explains about mode and terminal operation commands.
5.17.1 Mode Operation Commands
This section explains about mode operation commands.
5.17.1.1 admin
Function Switch to the admin class.
Available Model XG0224 / XG0448 / XG2600
Syntax admin
Options N/A
Use Mode Operation mode (user class)
Explanation Switch from the user class to the admin class.
This command has the same function as the "su" command.
Before switching, enter the administrator password, when asked.
To return from the admin class to the user class, execute the "exit", "end", "quit", or "!"
command.
Caution The settings of the "terminal" and "alias" commands will not be inherited by the
administrator mode.
Message
Enter an administrator password.
Switching to the admin class was failed due to the incorrect administrator password.
Enter the correct administrator password.
The administrator password is not set.
Set an administrator password.
The administrator password is seven or fewer characters in length.
Set an administrator password with eight or more characters.
The administrator password consists of only alphabetic characters or only numeric
characters.
Set an administrator password with alphanumeric characters and symbols mixed.
Password:
<ERROR> Authentication failed
<WARNING> weak admin password: set the password
<WARNING> weak admin password: contain at least 8 characters
<WARNING> weak admin password: contain a different kind of character