XG Series User's Guide Chapter 5 Command Reference
LLDP Counter, Log, Statistics, and Status Display and Clear Operation
Commands
481
Execution Example
(To be continued)
# show lldp
Send Interval Time : 30 seconds ---(1)
Send Hold Count : 4 times ---(2)
Send Delay : 2 seconds ---(3)
Reinit Delay : 2 seconds ---(4)
Notification Interval Time : 5 seconds ---(5)
Port Mode Size Info P N D C A P p N I M P L F T
---- ------- ---- -------------- ------- ------- -
(6) (7) (8) (9) (10) (11) (12)
1 enable 274 P N D C A P p N I M P L F -
2 receive 0
8 send 179 P - D C A P p N - M - - - -
Entry:3 ---(30)
#
# show lldp port 1,8 detail
Send Interval Time : 30 seconds ---(1)
Send Hold Count : 4 times ---(2)
Send Delay : 2 seconds ---(3)
Reinit Delay : 2 seconds ---(4)
Notification Interval Time : 5 seconds ---(5)
[PORT 1] ---(6)
Configuration Mode : enable ---(7)
Send LLDPDU size : 274 octets ---(8)
Chassis ID : subtype=4(MAC) info=00:0b:5d:fd:05:b2 ---(13)
Port ID : subtype=5(ifName) info="1" ---(14)
Time To Live(TTL) : 120 seconds ---(15)
Port Description : info="EthernetPort(ether1)" ---(16)
System Name : info="" ---(17)
System Description : info="'SBAX2' '1.2 V01.00' 'Wed Feb 13 15:23:07
JST
2008'" ---(18)
System Capabilities : info=Bridge,Router ---(19)
enabled=Bridge
Management Address : address subtype=1(IPv4) info=192.168.2.1 ---(20)
interface number subtype=2(ifIndex) info=3
oid=""
Management Address : address subtype=6(MAC) info=00:0b:5d:fd:05:b3
interface number subtype=2(ifIndex) info=7001
oid=""
IEEE802.1
Port VLAN ID : PVID=10 ---(21)
Port And Protocol VLAN ID : flags=supported,enabled ---(22)
PPVID=20
Port And Protocol VLAN ID : flags=supported,enabled
PPVID=21
VLAN Name : VID=10 ---(23)
name="portvlan10"
VLAN Name : VID=20
name="protocolvlan20"
VLAN Name : VID=21
name="protocolvlan21"
VLAN Name : VID=30
name="taggedvlan30"
IEEE802.3
MAC/PHY Configuration/Status : support/status=supported,enabled ---(25)
capability=1(10BASE-T half duplex mode),
2(10BASE-T full duplex mode),
4(100BASE-TX half duplex mode),
5(100BASE-TX full duplex mode),
8(PAUSE for full-duplex links),
11(Asymmetric and Symmetric PAUSE
for full-duplex links),
15(1000BASE-T full duplex mode)
type=16(100BASE-TX full duplex mode)
Power Via MDI : support=PSE,not supported ---(26)
Link Aggregation : status=capable,not in aggregation ---(27)
Maximum Frame Size : size=9216 ---(28)
SNMP Notification Trap Send : disable ---(29)