Fujitsu P3NK-4452-01ENZD 5.15.8.20 serverinfo ssh

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings
311
5.15.8.20 serverinfo ssh
Function Set the SSH login server function.
Available Model XG0224 / XG0448 / XG2600
Syntax serverinfo ssh ip <mode>
Options
<mode>
•on
Enable the SSH login server function.
•off
Disable the SSH login server function.
Use Mode Configuration mode (admin class)
Explanation Set whether or not to enable the SSH login server function.
Setting this command Off and the "serverinfo sftp" command Off will reject a connection
request using the IPv4 address from the ssh client.
Setting this command Off and the "serverinfo sftp" command On will reject a connection
request using the IPv4 address from the ssh client after the password was entered.
Caution Enabling this command generates an SSH host authentication key at device power-on
and execution of the "reset" command, and it takes several tens of seconds to several
minutes for the processing time.
ssh connection is enabled after the SSH host authentication key generation was
completed.
If this device has been started to enable this function while all the ssh and sftp functions
were Off, it also takes several tens of seconds to several minutes for the processing time
to generate an SSH host authentication key. Note that other processes may be affected;
session monitoring timeout may occur, for example.
Default It is assumed that the SSH login server function is enabled.
serverinfo ssh ip on