Fujitsu P3NK-4452-01ENZD 5.33.1.2 show igmpsnoop mrouter

XG Series User's Guide Chapter 5 Command Reference
IGMP Snooping Counter, Log, Statistics, and Status Display and Clear
Operation Commands
500
5.33.1.2 show igmpsnoop mrouter
Function Display the multicast router port information.
Available Model XG0224 / XG0448 / XG2600
Syntax show igmpsnoop mrouter [<vidlist>]
Options
N/A
Display information about all VLANs with the valid IGMP snooping.
<vidlist>
Specify a VID of VLAN to display the IGMP snooping information.
When specifying multiple VLANs, separate them with commas (,).
Also, when specifying the range, specify them with hyphens (-). (Example: 1-3)
The available description format is as follows:
•To specify values 1, 2, 3, 5 and 7 in the "vidlist"
Example: 1-3, 5, 7
•To specify values 1, 3 and 5 in the "vidlist"
Example: 1, 3, 5
Use Mode Operation mode (user class/admin class)
Configuration mode (admin class)
Explanation Display the multicast router port information held by IGMP snooping.
Execution Example
1) VLAN ID
2) Querier operation display
One of the following is displayed.
me : Indicates that the port is operating as the querier.
other : Indicates that the port is NOT operating as the querier.
other (off): Indicates that the port is NOT operating as the querier due to the
settings.
3) Number of the multicast router connection port
A hyphen (-) shows that no router port exists.
# show igmpsnoop mrouter
VLAN querier port
---- ---------- --------
(1) (2) (3)
1 other(off) 1
2 other 5
3 me 5
4 me -