2 Procedure
VCAUTION!
●The actions described in this manual should only be performed by engineers, service personnel or technical specialists.
●Equipment repairs should only be performed by authorized, qualified staff.
●Any failure to observe the guidelines in this manual, and any unautho- rized openings and improper repairs could expose the user to risks (e.g. electric shock, fire hazards) and could also damage the equipment.
●Please note that any unauthorized opening of the device will result in the invalidation of the warranty and exclusion from all liability.
ÊFirst of all please familiarize yourself with the safety instructions in the chapter “Safety Instructions” on page 9ff.
ÊMake sure that all required manuals (see “Additional documentation about the server” on page 1) are available, printing out the PDF files if necessary.
You will definitely need
–the Operating Manual for the server and
–the Service Supplement for the server
–the Technical Manual for the system board.
ÊShut down the server correctly, switch it off, pull out the power plug, and open the server as described in the chapter “Preparation” on page 15ff.
ÊExtend or upgrade your server as described in the relevant chapter.
IHow to install/remove the
ÊClose the server, plug all mains plugs into the power outlets, and switch on the server as described in the chapter “Completion” on page 45ff.
ÊStart the operating system and, if necessary, configure it as required (see the Operating Manual).
OptionsGuide | 7 |
