Fujitsu RX200 manual ESD label

Safety Instructions

ITo protect the CD-ROM/DVD drive and prevent mechanical damage, as well as premature wearing of the CDs, you should observe the following advice:

–Only insert the CDs in the drive when needed and remove them after use.

–Store the CDs in suitable sleeves.

–Protect the CDs from exposure to heat and direct sunlight.

Note on the laser

The CD-ROM/DVD drive contains a light-emitting diode (LED) classified according to IEC 825-1:1993:LASER CLASS 1.

Modules with electrostatic-sensitive devices

Electrostatic-sensitive components are identified by the following sticker:

Figure 1: ESD label

VCAUTION!

When you handle components fitted with ESDs, you must observe the following points under all circumstances:

●Remove the power plug from the power socket before inserting or removing components containing ESDs.

●You must always discharge static build-up (e.g. by touching a grounded object) before working with such components.

●The equipment and tools you use must be free of static charge.

●Use a grounding cable designed for this purpose to connect yourself to the system unit as you install components.

OptionsGuide 13