Fujitsu RX200 manual Main Memory, Installation rules

5 Main Memory

VCAUTION!

Please observe the safety information in the chapter “Safety Instructions” on page 9ff.

The eight slots for the main memory are suitable for PC2-3200 DDR-II DIMM memory modules. The board supports a maximum of 13-16 Gbytes of main memory (depending on the configuration). Organization in four memory banks, 0 to 3, enables fast memory access with two-way interleaving.

5.1Installation rules

VCAUTION!

Memory modules have to be installed in pairs. Each memory bank must always be fully equipped with the same type of modules.

The following memory configurations are permitted:

Mem. module	1	2	3	4	5	6	7	8	Mounted
Bank/DIMM no.	1.1	1.2	1.2	1.2	1.2	1.2	1.2	1.2	memory
Socket label	DIMM	DIMM	DIMM	DIMM	DIMM	DIMM	DIMM	DIMM	banks
	A1	B1	A2	B2	A3	B3	A4	B4	￿
Populated with 2	X	X							1
DIMMs
Populated with 4	X	X	X	X					2
DIMMs
Populated with 6	X	X	X	X	X	X			3
DIMMs
Populated with 8	X	X	X	X	X	X	X	X	4
DIMMs

OptionsGuide 17