Exchanging the processor | Processors |
ÊApply a small amount of thermal paste to the top of the new processor.
ÊSpread the paste thinly and evenly.
ÊFit the heat sink on the processor such that the side labeled “FRONT” is facing the front of the server (see page 23).
ÊAttach the heat sink with four screws. Tighten the screws in diagonally opposite sequence (see page 23).
ÊReinstall the ventilation duct (see page 20).
ÊClose the server, plug in the power plugs, and switch on the server as described in the chapter “Completion” on page 45.
26 | OptionsGuide |
