Upgrading / exchanging main memory | Main Memory |
5.2Upgrading / exchanging main memory
ÊOpen the server as described in the chapter “Preparation” on page 15f.
2 |
1 |
1 |
Figure 4: Removing a memory module
ÊFlip the ejector tabs on each side of the slot outward (1). This levers an installed memory module out of its slot.
ÊRemove the memory module from the slot (2).
2 |
2 |
Figure 5: Installing a memory module
ÊCarefully press the memory module into the slot (1) until the ejector tabs on both sides of it engage (2).
ÊClose the server, plug in the power plugs, and switch on the server as described in the chapter “Completion” on page 45f.
18 | OptionsGuide |
