Furuno FR-2115-B installation manual ARP Board ARP-26

4.2ARP Board ARP-26

The ARP Board ARP-26, which provides ARPA functions, is an optional circuit board which is accommodated in the processor unit. Note that the ARP-26 is not available with the statute mile-type radar.

Necessary Parts: ARP-26-2E (008-485-500)

Name	Type	Qty	Code No.
ARP Board	18P9002B	1	008-473-650

4.2.1 Installation of the ARP board

1.Turn off the power. Unfasten the PCB card case cover at the left front of the processor unit by unfastening four screws.

2.Set the ARP Board in the center slot of the PCB card case.

Top: RP Board (Option)

Middle: ARP Board (Option)

Bottom: SPU Board

Figure 4-5 Processor unit, inside view

3. Adjust the ARP Board referring to the procedure on the next page.

4-7