Furuno FR-2115-B installation manual Fabricating the DC power cable CVV-S 8X2C, option

2.2.2 Fabricating the DC power cable (CVV-S 8X2C, option)

1.Remove the vinyl sheath by 100 mm.

2.Unravel the braided shield 60 mm from end of cable.

3.Remove the jute tape and inclusion from cable.

4.Expose the cores by 50 mm.

5.Expose the shield by 60 mm. Tape the shield, leaving 10 mm exposed.

6.Remove the sheath of cores by 10 mm. Attach crimp-on lug type 8NK4 to the cores and crimp-on lug type FV5.5-4 (yellow) to the shield.

7.Tape the cable as shown in the figure below. Fasten the shield to screw (M4) on the cable clamp.

100 mm

CVV-S 8X2C

Braided Shield

60 mm

Core

Jute Tape

Inclusion

	50 mm
Taping	10 mm
	60 mm

Fasten cable clamp here.

Crimp-on Lug

8NK4 Crimp-on Lug

FV5.5-4

Taping

Figure 2-9 Fabricating power cable CVV-S 8X2C

2-6